4x6 Actual Size

The real dimensions of a nominal 4x6, and what it's commonly used for.

MeasurementValue
Nominal size4x6
Actual thickness3-1/2"
Actual width5-1/2"
Board feet per linear foot2.000
Approx. weight per linear foot5.19 lb (kiln-dried softwood)
Common usesDeck beams, posts carrying larger loads

Why a 4x6 measures 3-1/2" × 5-1/2"

Like all dimensional lumber, a 4x6 starts life close to its nominal size before it's dried and planed smooth on all four sides. That process removes roughly 1/2 inch from each dimension, leaving the actual, finished size you buy at 3-1/2" × 5-1/2". This is standard across every softwood lumberyard in the US, not specific to any one supplier.

Where these numbers come from

Actual dimensions reflect the American Softwood Lumber Standard (PS 20) size for surfaced dry (S-DRY) dimension lumber. Weight is an approximate figure for kiln-dried softwood framing lumber and varies somewhat by species and moisture content.

Frequently asked questions

Is a 4x6 really 4 by 6 inches?

No -- like all dimensional lumber, the 4x6 name describes the rough size before milling. After drying and planing, the actual size is 3-1/2" × 5-1/2".

Does this size vary by species?

The actual dimension is standardized across species for a given nominal size, though weight per linear foot varies somewhat since different softwood species have different densities.

What is a 4x6 commonly used for?

Deck beams, posts carrying larger loads.

Think we got it wrong? Let us know.

Don't see a calculator you need? Let us know.

All LumberCalcs tools